Glass-lined agitator is a kind of mixing equipment commonly used in chemical production. If we want to use this equipment skillfully, we need to have a detailed understanding of its use process and use effect. The transmission is an important part of the equipment's working process. The following editor introduces the transmission process of the agitator for us, let's take a look together.

The entire transmission device of the glass-lined agitator can be divided into three parts: input part, deceleration part, output part. The input shaft is equipped with a double offset sleeve with a displacement of 180°, and two roller bearings are installed on the offset sleeve to form H Arrangement, the center hole of the two cycloidal wheels is the raceway of the bearing on the pivoting arm. The mixing paddle agitator is composed of the cycloidal wheel and a set of ring gears placed on the needle gear meshing to form a small part. Gear tooth difference internal meshing deceleration arrangement, (in order to reduce conflicts, in a reducer with a small speed ratio, the needle gear is equipped with a needle gear sleeve). When the input shaft with the migraine sleeve rotates for a full circle, because of the characteristics of the tooth profile on the cycloidal wheel and its constraint by the needle teeth on the needle gear, the motion of the cycloidal wheel becomes a plane motion that revolves and rotates. When the input shaft rotates forward for one cycle, the migraine sleeve also rotates one cycle, the cycloid rotates a tooth difference in the opposite direction and then decelerates, and then rely on the W output arrangement to transmit the low-speed rotation of the cycloid through the pin shaft. Give the output shaft, and then get a lower output speed.

The above is a detailed introduction to the transmission process of the glass-lined agitator. As long as we understand its operating procedures in detail, we can save time and advance power when using the equipment to ensure that the equipment can achieve the intended use. I hope the above can help you. If you have any questions, please contact us.